2-layer T&G Engineered Flooring

2-layer T&G Engineered Flooring

Dimensions:

Thickness: 1/2″ (12.7 mm)
Width: 4 1/4″ (107.95 mm)
Length: from 1′ to 6′ (300 to 1845mm)
Tongue-and-groove profile. Microbevel on all 4 sides.

Construction:

The top, or ‘wear’ layer is 4mm thick and can be sanded up to 4 times.
Coswick uses only sawn lamellas for top layer because sawn hardwood veneers have no internal checks that might cause face splits in lamella later on.
Sawn hardwood lamellas are 100% solid wood and preserve the rich grain texture appearance. Plywood core consists of 7 cross-layers of birch.

Properties:

Установка над, на и ниже уровня земли

Coswick 2-layer engineered hardwood floors have minimal movement and maintain superb dimensional stability through seasonal humidity fluctuations.

2-layer engineered hardwood flooring can be installed above, on or below grade. It can be glued down over concrete or wooden subfloor, sound membrane or radiant heat system.

Features:

High-adhesion polyurethane glues are used to bond top hardwood veneer to plywood base. Extra strong bonding ensures that no delamination occurs even under elevated moisture conditions. Coswick polyurethane adhesives are 100% formaldehyde free and are environmentally friendly.

Installation method:

To install engineered T&G flooring, glue down over concrete, plywood or wooden subfloor or sound membrane.

Coswick Solid Hardwood Floors: solid and engineered hardwood flooring
3615 Laird Road Unit 9 MississaugaONL5L5Z8 Canada 
 905-569-3389

Warranties

Coswick Hardwood Inc warrants its products, in their original manufactured condition, to be free from defects in milling...

What the Warranty means »

Where to Buy

Coswick flooring can be bought from any of our authorized dealers and resellers across Europe and North America.

See Coswick dealers »

Free Flooring Samples!

Order up to 4 (four) samples of Coswick hardwood flooring and have them delivered to your door free of charge!

Order samples »